Expand and Shrink a Cluster

SynxDB achieves elastic scaling through gpshrink and gpexpand, which are the tools for shrinking and expanding a cluster.

When cluster resources are idle, for example, if disk space usage is consistently below 20% or CPU/memory utilization remains low, you can use gpshrink to shrink the cluster and save server resources.
When cluster resources are under pressure, for example, if disk space usage is consistently above 80% or CPU/memory utilization remains high, you can use gpexpand to expand the cluster and add server resources.

For cluster expansion, users add server resources and then use the gpexpand tool to add new segments on the new servers. For cluster shrinking, users can use the gpshrink tool to remove segments from redundant servers.

Both gpshrink and gpexpand execute in two phases:

In the preparation phase, it collects information about all user tables in the database that require redistribution.
In the data redistribution phase, it redistributes the data of all tables in the database cluster to the expanded or shrunken database.

Shrink a cluster using gpshrink

Create a three-node cluster.
```
make create-demo-cluster
```

Create a test table named test and check the status before shrinking.

-- Creates a table and inserts data.
CREATE TABLE test(a INT);
INSERT INTO test SELECT i FROM generate_series(1,100) i;
-- Views the data distribution of the test table.
SELECT gp_segment_id, COUNT(*) FROM test GROUP BY gp_segment_id;
-- Views the metadata status.
SELECT * FROM gp_distribution_policy;
SELECT * FROM gp_segment_configuration;

Create a shrinktest file and write the information of the segments to be removed into it.
```
touch shrinktest
```
The format for segment information is hostname|address|port|datadir|dbid|content|role. The information for each segment must include both the primary and the mirror, as shown below. If removing multiple segments, list the one with the higher content ID first. Ensure that the preferred role matches the role, listing p before m.
```
# Example for removing one segment, showing the primary and mirror information
i-thd001y0|i-thd001y0|7004|/home/gpadmin/cloudberrydb/gpAux/gpdemo/datadirs/dbfast3/demoDataDir2|4|2|p
i-thd001y0|i-thd001y0|7007|/home/gpadmin/cloudberrydb/gpAux/gpdemo/datadirs/dbfast_mirror3/demoDataDir2|7|2|m
```

Execute the gpshrink command twice.

# Preparation phase
gpshrink -i shrinktest
# Redistribution phase
gpshrink -i shrinktest

Main parameter	Description
-i	Specifies the input file listing the segments to be removed.
-c	Cleans up the collected table information.
-a	Collects statistics for the tables after redistribution.
-d	Sets a maximum execution duration. The process will be terminated if it times out. Used in the redistribution phase.

gpshrink is implemented in two main phases:

The first gpshrink -i shrinktest command completes the preparation work for shrinking: based on the shrinktest input file, it reads the segments to be removed, creates the corresponding tables gpshrink.status (to record the status of gpshrink) and gpshrink.status_detail (to record the status of each table), and gets all tables that need redistribution.

The second gpshrink -i shrinktest command completes the data redistribution work for shrinking: it calculates the new segment size after removal, runs gpshrink for each table to redistribute data, and finally removes the corresponding segments from gp_segment_configuration. During the redistribution phase, it is not recommended to create new tables, as they cannot be redistributed in the shrunken cluster. Some statements might also fail because certain tables are locked.

If the first gpshrink -i shrinktest command fails, it might be due to an error in the shrinktest file causing an interruption. In this case, simply run gpshrink -c to clear the collected data and then re-run gpshrink -i shrinktest.

If the second gpshrink -i shrinktest command fails, you need to log in to the database, check the status of the tables, and perform further data redistribution or rollback.

After shrinking, check the status of the test table again.

-- Views the data distribution of the test table.
SELECT gp_segment_id, COUNT(*) FROM test GROUP BY gp_segment_id;
-- Views the metadata status.
SELECT * FROM gp_distribution_policy;
SELECT * FROM gp_segment_configuration;

Expand a cluster using gpexpand

Create a three-node cluster.
```
make create-demo-cluster
```

Create a test table test and check the status before expansion.

-- Creates a table and inserts data.
CREATE TABLE test(a INT);
INSERT INTO test SELECT i FROM generate_series(1,100) i;
-- Views the data distribution of the test table.
SELECT gp_segment_id, COUNT(*) FROM test GROUP BY gp_segment_id;
-- Views the metadata status.
SELECT * FROM gp_distribution_policy;
SELECT * FROM gp_segment_configuration;

Create an expandtest file and write the information of the segments to be added into it.

touch expandtest

# Example for adding two segments, showing the primary and mirror information
i-thd001y0|i-thd001y0|7008|/home/gpadmin/cloudberrydb/gpAux/gpdemo/datadirs/dbfast4/demoDataDir3|9|3|p
i-thd001y0|i-thd001y0|7009|/home/gpadmin/cloudberrydb/gpAux/gpdemo/datadirs/dbfast_mirror4/demoDataDir3|10|3|m
i-thd001y0|i-thd001y0|7010|/home/gpadmin/cloudberrydb/gpAux/gpdemo/datadirs/dbfast5/demoDataDir4|11|4|p
i-thd001y0|i-thd001y0|7011|/home/gpadmin/cloudberrydb/gpAux/gpdemo/datadirs/dbfast_mirror5/demoDataDir4|12|4|m

Execute the gpexpand command twice.

# Preparation phase
gpexpand -i expandtest
# Redistribution phase
gpexpand -i expandtest

Parameter	Description
-i	Specifies the input file that lists the segments to be added.
-c	Cleans up the collected table information.
-a	Collects statistics for the tables.
-d	Sets a maximum execution duration. The process is terminated if it times out. This is used in the redistribution phase.

gpexpand is implemented in two main phases:

The first gpexpand -i expandtest command completes the preparation work for expansion: based on the expandtest input file, it copies necessary packages and tablespace statuses to the new segment hosts, starts the new segments, adds them to gp_segment_configuration, and creates the related status tables gpexpand.status (to record the status of gpexpand) and gpexpand.status_detail (to record the status of each table).
The second gpexpand -i expandtest command completes the data redistribution work for expansion: it will run alter table $table_name expand table for each table, using a process pool to accelerate execution. During the redistribution phase, it is not recommended to create new tables, as they will not be redistributed in the expanded cluster. Some statements might also fail because certain tables are locked.
If the first gpexpand -i expandtest command fails, it might be due to an error in the expandtest file. In this case, simply run gpexpand -c to clear the collected data and then re-run gpexpand -i expandtest.
If the second gpexpand -i expandtest command fails, you need to log in to the database, check the status of the tables, and perform further data redistribution or rollback.

After expansion, check the status of the test table again.

-- Views the data distribution of the test table.
SELECT gp_segment_id, COUNT(*) FROM test GROUP BY gp_segment_id;
-- Views the metadata status.
SELECT * FROM gp_distribution_policy;
SELECT * FROM gp_segment_configuration;